Nano-Care products

Nano-sealing / nano-sealant for boats

There are numerous answers to the question of why you should rely on high-quality nano-sealing by Nano-Care®. Our coating solutions not only make your boat significantly more resistant to negative external influences, but also provide long-term protection against salt water and UV radiation.

Benefit from our extensive experience in surface sealing of all kinds and let us advise you now.

Arrange a consultation now

Our product: Nano-Care® nano-sealing / nano-sealant for boats

As a specialist in surface sealing, we offer various solutions both for self-application and for professional application by third-party providers.

With our Nanoflex® zero NMR and Nanoflex® Dura products, which are specially tailored for use on boats, you not only benefit from long-lasting protection for your boat thanks to the ultra-thin nano-protective layer, but can also maintain the appearance of your boat in the long term and thus safeguard its value.

In addition, our Nano-Care® products for boats offer many other useful properties, which we would like to present to you below.

In addition, our sealing solutions can be refreshed at any time to prolong the sealing effect and always achieve optimum results.

Product properties and advantages of our Nano-Care® boat sealants

While our Nanoflex® zero NMR sealant solution for self-application promises a lasting effect for more than one season, between 6 and 12 months, the Nanoflex® Dura sealant, which is applied by a specialist, is effective for 5 to 10 years.

Regardless of the duration of effect, you benefit from these properties and advantages with all our sealing solutions for boats:

Long-lasting protective effect

With sealing solutions that are optimally tailored to boats, you benefit from protection against all common external influences in boat use, including salt water, UV radiation and rust on external parts of the boat.

Dirt-repellent property

due to the non-stick effect of our nano-sealing / nano-sealant, which is caused by the application of the sealant; this fills the pores of the boat surface and creates a smooth surface that offers significantly reduced adhesion for dirt and other unwanted substances.

Value and optics retention

as the applied protective layer not only protects against fading by providing an additional barrier against UV rays, but also prevents water and other liquids from penetrating the material and thus negatively altering the surface.

Less maintenance required

as the nano-sealing / nano-sealant not only makes the surface of your boat more resistant to damage, but also noticeably reduces the need for cleaning and maintenance thanks to the beading effect.

Environmental friendliness

as we rely on silicone-free and environmentally friendly contents and, in addition, aggressive cleaning agents can be largely dispensed with when cleaning boats after nano-sealing / nano-sealant.

Application of our nano-sealing Nanoflex® zero NMR for your own use

In order to achieve the optimum effect of our nano-sealing / nano-sealant Nanoflex ® zero NMR, including self-application, it is particularly important to prepare and apply the sealing solution meticulously. In the following, we would like to explain to you in detail how the application should be carried out in the best possible way.

1. thorough preparation

Thorough preparation of the surface before applying the nano-sealing / nano-sealant is at least as important as the actual application of the sealing solution.

To do this, the desired surface should first be separated from other surfaces that are potentially not to be sealed. To do this, remove the part of the boat to be sealed or thoroughly mask off the surrounding surface parts that are not to be sealed.

The surface to be sealed must then be meticulously cleaned. Not only should the surface be cleaned of all impurities, but all oil and grease residues should also be removed.

After basic cleaning, the surface should be rinsed again with clear water before applying the nano-sealing / nano-sealant and given the necessary time to dry completely. After drying, we recommend starting the sealing process immediately to avoid the risk of re-soiling the surface.

2. application/application

Before applying the nano-sealing / nano-sealant to the entire surface, it is advisable to test it on a small sample part. The sealer should be applied sparingly in small stages to approx. 50×50 cm areas, either by rubbing or spraying. We recommend applying approx. 10 to 25 ml of sealer solution per square meter of boat surface.

Depending on the existing humidity, the drying and hardening of the surface can take different amounts of time, but at least 24 hours should be allowed for this. The material should only be polished once it has fully cured.

The beading effect (lotus effect) takes full effect no later than 24 hours after polishing. A successfully applied nano-sealing / nano-sealant can be recognized by the fact that water reacts to form beads on the entire surface; as soon as this is no longer the case, it is recommended to refresh the surface by repeating this process.

3. further helpful specifications

  • Optimal storage conditions: Temperature range from +5°C to +25°C
  • Ideal for processing: temperature between +5°C and +25°C
  • Note weather conditions: Do not use at temperatures below +5°C
  • Recommended application quantity: approx. 10 to 25 ml per square meter
  • Drying time: between 60 and 120 minutes at an ambient temperature of +20°
  • Curing time: 24 hours at an ambient temperature of +20°C
  • Storage and shelf life: Store according to label information, tightly closed and out of sunlight/frost

Treatment of scratched GRP surfaces

The application of our nano-sealing / nano-sealant Nanoflex® zero NMR is also recommended for the treatment of GRP surfaces damaged by scratches. The first step is to thoroughly clean the scratched surface, preferably with desalinated and distilled water. As soon as the surface has been freed of all dirt, oil and grease residues, fine sanding polishing is carried out to prepare the material for the nano-protective coating to be applied. After applying the sealant evenly by rubbing or spraying, the material should be given sufficient time to dry.

This process can remove scratches on GRP surfaces and restore their shine. After our nano-sealing / nano-sealant treatment, you also benefit from long-lasting protection of the finished surface.

Areas of application for our boat sealant / marine sealant

The choice of the right nano-sealing / nano-sealant solution depends on the desired area of application. Above water, our easy-to-apply Nanoflex® zero NMR solution is recommended, including for the interior of your boat. If you are looking for a suitable sealing solution for underwater surfaces, we recommend using the professional application of Nanoflex® Dura and having the parts of your boat that are constantly exposed to water sealed by an experienced specialist. As experts in sealing surfaces of all kinds, we offer solutions for almost all materials used on boats, including

  • Dashboards, trims and covers
  • Surfaces with plastic coating for indoor and outdoor use
  • Acrylic, acrylic glass and polyvinyl chloride
  • Painted areas/areas with paint application
  • Glass fiber reinforced plastic (GRP)
  • Glass products
  • Chrome-coated surfaces

In addition, we recommend our product Nanoflex® Tex 4 for sealing tarpaulins or teak decks.

Your advantages when choosing surface sealants from Nano-Care®

Our high-quality sealing products from Nano-Care® impress with their durability and global promise of effectiveness.

More protection

through a durable sealing solution

More cleanliness

by completely lining porous surfaces and small scratches

More consistency

due to the beading of dirt using the lotus effect

Awards, development partners & certifications