The smartest way to use waterproofing spray and wash for tents, jackets and footwear! I usually get raindrops falling on my head, but since I waterproofed my gear, things...read more
Indoor spaces usually do not come into contact with moisture much – bathrooms and showers once excluded. A nano coating of the shower ensures that the drying of the bathroom is significantly accelerated. The positive effects extend both to cleaning and to your own health: on the one hand, you can largely dispense with toxic and aggressive cleaning agents in the bathroom in the future, and on the other hand, mold growth is significantly inhibited. In the future, a simple water jet will suffice for cleaning the bathroom. What other advantages does nano coating offer in the bathroom, and what should you know about its use?
What are the advantages of nanosealing in the shower?
If you regularly clean your bathroom, then you yourself will know how much effort this involves: after only a short time, soap residues collect in the shower. Limescale deposits are also the rule rather than the exception, especially with hard tap water. In other words, with daily use, you are likely to notice that soap scum needs to be removed even after just a few days. Cleaning is only possible with aggressive cleaning agents, which you have to let soak in for some time. A scraper sponge is also helpful to remove these soap residues. Even if you ventilate carefully, sooner or later you will be able to detect mold in the joints of the tiles. To sum up, you will need to clean the bathroom more often than any other room in your house – especially since most people place special emphasis on hygiene here.Get in touch
Remove the basis of life from the mold
But why not solve the problem at its root? The basis for mold is moisture, and even the soap scum and lime deposits only become visible because the moisture lingers in the bathroom for a long period of time. A nano coating smoothes the surface of the tiles and the shower tray so that the water slides into the drain without any residue – and this sliding is to be taken quite literally: If you have already been able to observe the lotus effect in nature, then you should not have been unjustifiably impressed – even the smallest drop of water seems unable to stay on the leaves of the lotus plant.Get in touch
Your advantages with Nano-Care
Soiling from soap and lime do not keep in the shower.
Protection for skin and environment
Aggressive, chemical cleaners are no longer necessary.
Hygienic and smart
Shower in the future easily cleaned with water and a microfiber cloth.
How to seal the shower works
Of course, the question arises for you, how the nano coating in a shower can work at all. Basically, the ceramic in your bathroom is already sealed by a varnish – but it has more or less large pores. These pores, when enlarged several times, appear like a cratered landscape, providing a foothold for moisture as well as soap or shampoo residues – which is manifested by unsightly deposits that can usually be observed after just a few days of use. Our nano coating ensures that these craters are closed.
Even when magnified, you would now see a flat surface that no longer allows foreign substances to penetrate – and this over a very long period of time. This ensures that the water with all the dissolved components such as soap or shower gel beads off completely and flows down the drain.
Even in your outdoor area you can use our waterproofingGet in touch
Awards and certificates by
Application areas of our nano coating
Especially in the joints, moisture is retained for a long period of time, which makes frequent cleaning necessary. If you have not done this cleaning for a certain period of time, you will know from your own experience that the cleaning afterwards will be all the more difficult. In the joints it becomes particularly clear what the problem of most materials is: The surface is more or less uneven and offers both the water and the soap and even some cleaning agents a good adhesion base. Where this basis is particularly given, soiling and unsightly water stains occur particularly quickly. In terms of the application area of nano coating, this means that you can particularly benefit from the positive effects here.
The shower head itself can also be protected from limescale deposits by the nano coating. Of course, it makes just as much sense to seal the sink itself and thus keep it sparkling clean for longer. With shaving cream, daily hand washing and toothpaste, the sink is exposed to many care products that can potentially cause staining. Use our nano coating shower to keep your wet room clean.
These questions are often asked about nano coating in the shower.
The biggest advantage, which you will appreciate after a short time, is the much less frequent need to clean the bathroom. All surfaces that have been treated by the nano coating in the shower no longer take dirt. Cleaning is done by simply rinsing them with water. Until now, you are probably used to cleaning the shower about once a week with special detergents and removing the soap residues deposited within a few days. This work belongs to the past for you, if you should decide for such a nano coating. Another positive aspect is, of course, the side effects of not having to do the necessary cleaning. There is no longer any need to buy cleaning agents – which should also have a positive effect on your wallet in the long run.
This question cannot be answered in a general way, because the durability of the sealant depends very much on the frequency of use. If you assume that a family of four showers every day, then the nano coating will wear off faster than it would in a single household. However, even with heavier use, you can expect the seal to last for many months before needing to be refinished. In favorable cases, users have already reported to us that reapplication of the sealant was only necessary again after a few years.
At nano coating, the relatively coarse-pored surface of the ceramic is sealed with a care product. This sealant provides a flatness to the surface that allows water and all components dissolved in water to roll off, preventing staining from lime scale or soap residue over a very long period of time. In the shower, or in the bathroom in general, such a sealant is particularly useful because the bathroom comes into contact with water every day and soiling usually occurs quite quickly.
Yes, you can do the sealing of the ceramic tiles and the shower wall yourself. In this regard, it is important that all surfaces to be treated with our nano coating are carefully cleaned and degreased before applying the product. Classic soap consists largely of grease, which can be deposited on ceramic surfaces with unsightly streaks. If these streaks are not removed, then the sealant itself will not be able to adhere to the surface, which means that the desired effect will not last long. In addition, you should only use our product sparingly so that you have less work to do when trying it out later. In addition, this increases the yield of the sealant.
You too can benefit from nano coating
Nature shows us how: Most materials that regularly come into contact with water can be protected from the undesirable effects – your shower is definitely one of them. By coating your shower at nano coating, you ensure that unsightly impurities caused by limescale from the water as well as soap residue can no longer adhere to the ceramic. Sealing the surface makes it so smooth that even water no longer finds a foothold there and runs completely into the drain. In this way, you not only prevent soiling of the shower, but also prevent typical moisture pockets that can promote the formation of mold in your bathroom.
Our sealant can be applied by yourself after a thorough cleaning, which saves further costs. Subsequent cleaning is then done in seconds with a simple water spray. You can save yourself the purchase of expensive cleaning products for the bathroom in the future. The effect is also long-lasting, as many customers repeatedly confirm to us: under favorable conditions, the nano coating of the shower only needs to be renewed again after a few years.
What our customers say
We were looking for an innovative company that could provide modern solutions in different business areas. Nano Care took the time to understand who we are as a company and the market in which we operate. So far, we have worked with their building and textile protection products, Dura ceramic coatings for automobiles, and the revolutionary Liquid Guard antimicrobial coating. The feedback we receive from our customers is more than satisfactory. We wholeheartedly recommend working with Nano Care and implementing their solutions.
Grigor Mihov , CEO Nano Coat Bulgaria
A very professional team!
Nanocare is a reputable company with excellent products, probably the best nanoproducts on the market.
They have been a reliable partner for many years.
Toni Jacquot, NanoProtection, France
As Nano-Care AG sales partner in the international aviation market, we were able to successfully qualify and list the product with the Liquid-Guard technology by AIRBUS as the first product of this kind for the protection of surfaces against viruses and germs in all cabins.
The Liquid-Guard technology for surface coating is a proven result of scientific innovation “Made in Germany”, which will not only currently, but also in the future, play an important role in the protection of our health.
The service and the professional, scientific support as well as the cooperation for us as partners of Nano Care AG, we can only rate as outstanding and exemplary in every respect.
In particular, we would like to thank Dr. Fabienne Hennessen for her work.
Jörg Schukies , AIRDAL GmbH / Decorative Products GmbH; Quality System Manager / Quality Auditor
Our last articles