1
1

High quality Textil waterproofing with Nano-Care

waterproof textiles and fibers is a special challenge. The fabrics must not lose their technical properties despite a protective coating. In addition, the waterproofing must also tolerate normal handling of the fabrics and not dissolve through use. This presents major hurdles in the development of a waterproofing for textile and fiber fabrics. Nano-Care has succeeded in overcoming these hurdles and developing products that offer the right sealant for every type of fabric. Each of these products offers the same catalog of outstanding features

Textil waterproofing

for your convertible
The Nano-Care textile waterproofing is the first choice for protecting and maintaining high quality fabric roofs for convertibles. This fiber coating makes a fabric roof permanently tight, stain resistant and retains its color. The textile waterproofing is also very durable. Refreshing at the start of the season and before the winter break is quite sufficient. The convertible roof is thus permanently protected and retains its function and color throughout the season.

Fancy weatherproof waterproofing?

Get in touch
Superhydrophobie nanoversiegelung

Textil waterproofing

for house and garden
The Nano-Care textile waterproofing is also excellent for protecting all fiber and textile fabrics in the house and garden. With this protection and care product you can very well treat your gazebos, parasols and folding chairs. They stay fresh longer and do not fade so quickly. After a rain your things are clean again and shine like new.

You want to be prepared for the sunny summer days?

Get in touch
Keramikversiegelung Garten Anti Aging

Waterproofing agents

for the interior
Nano-Care also offers a whole range of impregnating agents for indoor use. With these products you can provide your upholstery, sofas, chairs and cushions with a protective coating. Spilled coffee or cola can thus no longer penetrate the fabric and soil it. The products from Nano-Care are also suitable for leather. This gives your leather sofas and leather seats in the car an extra protection against dirt and for a long life.

Get in touch
Nanoversiegelung Haus und Garten

Your advantages with Nano-Care

Icon nachhaltiger Schutz

Sustainable protection

The Nano-Care textile sealant covers the fabric with a waterproof film that protects it from any kind of wetness.

Icon Schutz fasern

Durable protection of the fibers

The Nano-Care fiber waterproofing is pliable and flexible. It does not harden, but retains the elastic state.

Icon Oberfläche

Self-cleaning surface

The Nano-Care waterproofing agents create a micro-rough surface, like the one found on lotus flowers.

Icon Lebensdauer

Extending the service life

The textile waterproofing of Nano-Care completely envelops the fibers. They are thus permanently protected from dirt particles.

Awards and certificates by


Logo PSM
Logo SGS Taiwan
Logo IHK
Dermatest
Logo OMPG
Logo STFI Smarttex
Logo German Innovation Award
Logo CBA
Quality Labs New
Logo Oeko Tex
Logo Creditreform

The Innovative Technology of Nano-Care for the waterproofing of Textiles

The textiles to be protected are first thoroughly cleaned. Any soiling that is not removed is sealed by the textile waterproofing. This makes cleaning afterwards unnecessarily difficult.

The Nano-Care textile waterproofing is applied with a sponge or with a sprayer. If possible, the waterproofing solution can also be washed in. After drying and the specified exposure time, the fabrics are sustainably protected against penetrating oil or water.

The nano coating of the fibers also creates a micro-rough surface that keeps water and dirt out. This also gives textiles a self-cleaning surface. To clean them, all you need to do is wipe them with a damp cloth or rinse them with running water, for example from a watering can.

However, please do not use steam or high-pressure cleaners. This would destroy the waterproofing layer and make it ineffective. Trust in the advantages that Nano-Care offers you with its products. You will get a sustainable, durable and health-safe protection for all kinds of fiber fabrics in your household.

Get in touch

Produkte nanoCare

Product overview


Nanoflex® Tex 2 is a water-based spray-on product for achieving dirt-, water- and oil-repellent effects. Its ease of use makes it particularly suitable for use in the consumer and retail sectors. Especially absorbent textile substrates are excellently protected by Nanoflex® Tex 2. Main application areas are absorbent upholstery/furniture, as well as suede/alcantara. In addition, most commercially available textiles, carpets and curtains can be treated if they are free of surface-active substances (silicones/surfactants). The product is Ökotex certified (ECO-Passport), UV stable and shows no migration. Nanoflex® Tex 2, through the intelligent arrangement of hybrid (organic and inorganic) structures, is part of the INTELLIGENT HYBRIDS® concept of the Nano-Care Deutschland AG.

Specifications
Chemical base: modified silicon dioxide
Layer thickness: approx. 100 – 150 nm
Water repellency: between 130° and 150° (20µl)
Oil repellency: between 120° and 130° (20µl)
slip angle: not applicable
Temperature stability: 250°C permanent, 450°C peak
Chemical stability: between pH 1 and pH 13
Weathering resistance: 3500h according to ISO 11507 A
Washing stability: 10 – 40 washes LTD according to (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference.
Salt water resistant: Yes
Transparency: 100%
Storage stability: 2 years
Temperature sensitivity: 1°C to 30°C
Consumption: 80 – 150 ml/m2
Application: The coating liquid is applied to the surface by standard pump spray systems. If the substrate cannot absorb the liquid immediately, the use of a paint roller is recommended to ensure uniform wetting. The coating is fully cured after 24 hours.

A padder / padding application is also possible. Washing stability can be increased with Nanoflex WX (crosslinker) in this process.

The finishing material must be free of anionic, surface-active residues. Silicones or surfactants interfere with effect and adhesion. We will be happy to provide technical support with regard to pre-cleaning.

Nanoflex® Tex 2 is additionally available in the quality grades Textile and Tex 4. These formulations contain a lower (textile) or higher (Tex 4) proportion of active components.

The product is water-based and not a hazardous material according to ADR and IATA. However, it can also be shipped as a liquid concentrate (Nanoflex® Concentrate TP).

For handling of Nanoflex® Tex 2 please refer to the safety data sheet.

Nanoflex® L-Care is a fluorine-free water-based spray-on product for achieving dirt and water repellent effects on leather. Its ease of use makes it particularly suitable for use in the consumer and retail sectors. The product complies with the ZDHC joint roadmap. Especially smooth leather is excellently protected by Nanoflex® L-Care and experiences a caring effect. In addition, most commercially available textiles, carpets, upholstery and curtains can be treated, as long as they are free of surface-active substances (silicones/surfactants). Due to the intelligent arrangement of hybrid structures (silicon dioxide/wax), Nanoflex® L-Care is part of the INTELLIGENT HYBRIDS® concept of the Nano-Care Deutschland AG.

Specifications
Chemical base: Combination of modified silica and wax.
Coating thickness: > 300 nm
Water repellency: Between 130° and 150° (20μl).
Oil repellency: no
Glide angle: not applicable
Temperature stability: 180°C
Chemical stability: between pH 3 and pH 11
Weather resistance: 500h according to ISO 11507 A
Washing stability: low
Salt water resistant: yes
Transparency: 100%
Storage stability: 1 year
Temperature sensitivity: 1°C to 30°C
Consumption: 30 – 50 ml/m2
Application: The coating liquid is applied to the surface by standard pump spray systems. If the substrate cannot absorb the liquid immediately, e.g. in the case of smooth leather, it is rubbed in with light polishing movements. The coating is fully cured after 24 hours.

The finishing material must be free of anionic, surface-active residues. Silicones or surfactants interfere with effect and adhesion. We will be pleased to provide technical support with regard to pre-cleaning.

The product may change after a longer standing time (e.g. creaming, sedimentation, separation). Stir or shake extensively before use.

The system can be used in all Ökotex classes (APEO/formaldehyde-free). Nanoflex® L-Care is a ready mix and not available as a concentrate. The product is water-based and not a dangerous good according to ADR and IATA.

For handling of Nanoflex® L-Care, please refer to the associated safety data sheet.

Nanoflex® Wash-on is a polymer-based product for achieving dirt-, water- and oil-repellent effects on all types of fibers. It was specially developed for application with the aid of washing machines. Especially absorbent textile substrates are excellently protected by Nanoflex® Washon. The main area of application is absorbent clothing, as long as it is free of surface-active substances (silicones/surfactants). Due to the intelligent arrangement of hybrid (organic and inorganic) structures, Nanoflex® Wash-on is part of the INTELLIGENT HYBRIDS® concept of the Nano-Care Deutschland AG.

Specifications
Chemical base: Fluorinated polymer
Coating thickness: > 300 nm
Water repellency: Between 130° and 150° (20μl).
Oil repellency: between 120° and 130° (20μl)
Glide angle: not applicable
Temperature stability: 200°C
Chemical stability: between pH 1 and pH 13
Weather resistance: 500h according to ISO 11507 A
Washing stability: 10 – 40 washes LTD according to (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference.
Salt water resistant: Yes
Transparency: 100%
Storage stability: 1 year
Temperature sensitivity: 1°C to 30°C
Consumption: 3 – 4% of concentrate based on dry textile weight or 6 – 8% based on application amount of water.
Application: The coating liquid is applied by one wash cycle in standard washing machines. The use of further washing agents is dispensed with. Optimum performance is achieved from 4% based on the dry textile weight. The amount of water used in the washing machine must be known in advance if the dosage is based on the amount of water used.

The product achieves effects after air drying, the maximum effect is achieved only after heating (50°C) in a dryer.

The finishing material must be free from anionic, surface-active residues. Silicones or surfactants interfere with effect and adhesion. We will be pleased to provide technical support with regard to pre-cleaning.

Nanoflex® Wash-on is available exclusively as a concentrate. The product is water-based and not a hazardous material according to ADR and IATA.

For handling Nanoflex® Wash-on, please refer to the associated safety data sheet.


Our services of textile and fiber materials


The Nano-Care impregnation solutions keep dew, rain and splashing water away from textile and fibrous fabrics. When moistened, the water immediately beads off the surface and does not penetrate the fibers. The capillary action of the fabric is stopped and the textiles always remain dry.

The Nano-Care textile waterproofing creates a micro-rough structure on the surface. Water droplets, mold spores and sharp-edged dust particles are thus kept at a distance from the sensitive fibers. The next time it rains, the water carries the dirt particles away, leaving nothing but a clean surface.

The sheathing of the fibers is permanently protected from contact with water by waterproofing solution from Nano-Care. This reliably prevents mold or rot from spreading in the fabric.

The Textil waterproofing from Nano-Care completely envelops the fabric. It not only protects the fibers and their colors from moisture and dirt. The nano coating also provides some protection against ultraviolet radiation. The fabrics fade less and retain their original colors longer. This prolongs their service life and makes them permanently attractive.

These questions are frequently Textil waterproofing asked.


The waterproofing is either washed in or applied. The wash-in method is particularly effective. If this is not possible, several layers of waterproofing agents must be applied, depending on the type of fiber.

The durability of waterproofing of textile and fiber materials depends on their load. Mechanically lightly loaded products such as pavilions, sunshades or fabric roofs of convertibles need at most two refreshings per year. Products exposed to high mechanical stress, such as sofas or armchairs, require more frequent refreshing of textile waterproofing.

The waterproofing agents of Nano-Care do not contain PFC, which is harmful to health and the environment. It has been successfully replaced by harmless silicon oxide – as finely ground sand. Nevertheless, we recommend wearing mouth and eye protection for processing. This will permanently eliminate any risk of an allergic reaction.

The protective film of Nano-Care sealant also has slight protective properties against UV radiation. The colors of convertible roofs, gazebos or sunshades do not fade as quickly due to the treatment with waterproofing of textile and fiber materials. This additionally prolongs the service life of the products.

What our customers say


As Nano-Care AG sales partner in the international aviation market, we were able to successfully qualify and list the product with the Liquid-Guard technology by AIRBUS as the first product of this kind for the protection of surfaces against viruses and germs in all cabins.
The Liquid-Guard technology for surface coating is a proven result of scientific innovation “Made in Germany”, which will not only currently, but also in the future, play an important role in the protection of our health.
The service and the professional, scientific support as well as the cooperation for us as partners of Nano Care AG, we can only rate as outstanding and exemplary in every respect.
In particular, we would like to thank Dr. Fabienne Hennessen for her work.

Jörg Schukies , AIRDAL GmbH / Decorative Products GmbH; Quality System Manager / Quality Auditor

Kundenmeinung Jörg SchukiesJörg Schukies

A very professional team!

Nanocare is a reputable company with excellent products, probably the best nanoproducts on the market.
They have been a reliable partner for many years.

Toni Jacquot, NanoProtection, France

Kundenstimme Nanoprotection FrankreichToni Jacquot

We were looking for an innovative company that could provide modern solutions in different business areas. Nano Care took the time to understand who we are as a company and the market in which we operate. So far, we have worked with their building and textile protection products, Dura ceramic coatings for automobiles, and the revolutionary Liquid Guard antimicrobial coating. The feedback we receive from our customers is more than satisfactory. We wholeheartedly recommend working with Nano Care and implementing their solutions.

Grigor Mihov , CEO Nano Coat Bulgaria

Kundenstimme Nano Coat BulgarienGrigor Mihov

News

Our last articles

Ceramic coatings car

Field report ceramic sealants car

A hype or a profitable investment? Field report on ceramic sealants for cars The internet is full of questions like, “What is the best ceramic coating?” or “Are nano-ceramic...

read more